zermelo Et si il suffisait d'un clic Profil : Jeune recrue | Je sais que les choses sont difficiles sous linux pour avoir rencontré pas mal ,sinon de problèmes, au moins de complications (lots de tout débutants sous linux)
J'ai cups et deplus comme je l'ai dit j'ai suivit pas à pas les instructions d'installation fournit avec les 2 rpm à télécharger sans message d'erreur pas (même des trucs genre ça ne veux pas marcher parce qu'on est pas dans le bon répertoire comme ça m'est arrivé pour d'autre installation) mais, et c'est certain, quelque chose a du m'échapper, mais impossible de comprendre quoi (peut être encore se truc de pas dans le bon répertoire mais j'ai fait attention; et si j'avais pas été dans le bon répertoire ça aurait pas marché à moins que...).
Doc que je cite pour mémoire
Code :
- 2. Installing/Uninstalling the Printer Driver
- Installing the Printer Driver
- The printer driver must be installed in order to print from Canon LBP printers using Linux.
- The printer driver files to be installed consist of:
- * cndrvcups-capt-1.0X-X.i386.rpm : rpm file of the CAPT printer driver
- * cndrvcups-common-1.0X-X.i386.rpm : rpm file of a common module for CUPS drivers
- Note
- * Before installing this driver, CUPS must be installed and started on the operating system. Also make sure that printers can be added and enabled by various services, according to the security level that has been set.
- * When installing a new version of the Canon CAPT Printer Driver for Linux, install the new driver after you have uninstalled the current driver.Refer to "Uninstalling the Printer" for details on the uninstalling method.
- * You cannot print with this printer driver if LBP-1210 is being used in parallel connection.
- 1
- Start Linux after installation, and log in as 'root'.
- $ su
- 2
- Install the module for PDL drivers.
- Enter the following rpm command:
- # rpm -ivh cndrvcups-common-1.0X-X.i386.rpm
- Note
- * When you execute the rpm command from a directory, specify the path or use the cd command to change the current directory to the directory containing the printer driver files.
- * For details about the rpm command, enter "man rpm" with the terminal software, such as GNOME Terminal.
- 3
- Install the CAPT printer driver.
- Enter the following rpm command:
- # rpm -ivh cndrvcups-capt-1.0X-X.i386.rpm
- 4
- Restart CUPS.
- Enter the following command:
- # /etc/rc.d/init.d/cups restart
- Note
- * Do not register the printer using the "lpadmin" command before restarting CUPS.
- 5
- Register the printer (PPD) with the print spooler.
- Enter the following command:
- # /usr/sbin/lpadmin -p [printer name] -m [PPD file name] -v ccp:/var/ccpd/fifo0 -E
- For the PPD file corresponding to your printer, refer to "Supported Canon Products" of "1. Introduction".
- Example:
- To register the LBP3200 in the print spooler as "LBP3200":
- # /usr/sbin/lpadmin -p LBP3200 -m CNCUPSLBP3200CAPTJ.PPD -v ccp:/var/ccpd/fifo0 -E
- 6
- Register the printer in the ccpd daemon setup file.
- Enter the following command.
- # /usr/sbin/ccpdadmin -p [printer name] -o [printer device path]
- Example:
- Register LBP3200 in the ccpd daemon setup file.
- # /usr/sbin/ccpdadmin -p LBP3200 -o /dev/usb/lp0
- 7
- Start ccpd daemon.
- Enter the following command.
- # /sbin/service ccpd start
- Note
- * It would be convenient to set ccpd daemon to start automatically when Linux starts up.
- (code pour déspécialiser les :/)
|
Concernant les tuto, quand je tape "canon LBP 1120 linux" google ne fournit rien d'interessant à part les "super canon fournit des drivers"
Et comme j'avais un peu de sous je voulais acheter ma tranquilité en contribuant à encourager les constructeurs soucieux de rendre la vie plus facile aux personnes débutant sous linux.
En attendant je vais continuer a taper mes cours sous linux, les enregistrer sur la partition fat32 qui me sert aux échanges xp<->linux, et les imprimer sous xp moyennant un redémarrage.
Voila...
|